LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2012 >> Lancer Evolution GSR >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Supplemental Restraint System (SRS) - Lancer) >> Post-Collision Diagnosis >> Repair Procedure >> Clock Spring

Clock Spring

WARNING: This page is about a different variant/trim than selected.
  1. Check the clock spring connectors and protective tube for damage, and the terminals for deformation.
  2. Visually check the case for damage.
  3. Check for continuity between the connectors (Refer to INSPECTION  ) < Except RALLIART >, (Refer to >> C << STEERING WHEEL ASSEMBLY/DRIVER'S AIR BAG MODULE ASSEMBLY INSTALLATION  ) < RALLIART >
    Fig 1: Identifying Clock Spring Connector Case And Protective Tubes
    G05385074Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals