LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2012 >> Lancer Evolution GSR >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Supplemental Restraint System (SRS) - Lancer) >> Knee Air Bag Module >> Inspection >> Knee Air Bag Module Check

Knee Air Bag Module Check

WARNING: This page is about a different variant/trim than selected.
WARNING: Never attempt to measure the circuit resistance of the air bag modules (squib), even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental air bag deployment will result, and possible serious personal injury.
WARNING: If any component damage is found during the following inspection, replace the air bag module with a new one. Dispose of the old one according to the specified procedure (Refer to UNDEPLOYED AIR BAG MODULE DISPOSAL  ).
  1. Check the inflator surface for cracks, dents or deformations.
  2. Check the air bag for breakage.
  3. Check the connector for damage, the terminal for deformation and the harness for binding.
    Fig 1: Identifying Inflator And Squib Connector
    G05906168Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals