Scan Tool Or Voltmeter

If a problem is found in the Pulse Check, observe the table below.

SCAN TOOL OR VOLTMETER SYMPTOM CHART

SYMPTOM		INSPECTION PROCEDURE	REFERENCE
ETACS-ECU does not receive any signal from the key reminder switch.		N-1	Refer to INSPECTION PROCEDURE N-1: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE KEY REMINDER SWITCH.
ETACS-ECU does not receive any signal from the hazard warning light switch.		N-2	Refer to INSPECTION PROCEDURE N-2: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE HAZARD WARNING LIGHT SWITCH.
ETACS-ECU does not receive one of signal from any of the door switches.		N-3	Refer to INSPECTION PROCEDURE N-3: ETACS-ECU DOES NOT RECEIVE ONE OF SIGNAL FROM ANY OF THE DOOR SWITCHES.
ETACS-ECU does not receive one of signal from the front door lock actuator.		N-4	Refer to INSPECTION PROCEDURE N-4: ETACS-ECU DOES NOT RECEIVE ONE OF SIGNAL FROM THE FRONT DOOR LOCK ACTUATOR.
ETACS-ECU does not receive one of signal from the door lock switch (incorporated in the power window main switch and front power window sub switch).		N-5	Refer to INSPECTION PROCEDURE N-5: ETACS-ECU DOES NOT RECEIVE ONE OF SIGNAL FROM THE DOOR LOCK SWITCH (INCORPORATED IN THE POWER WINDOW MAIN SWITCH AND FRONT POWER WINDOW SUB SWITCH).
ETACS-ECU does not receive any signal from the trunk lid latch assembly.		N-6	Refer to INSPECTION PROCEDURE N-6: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE TRUNK LID LATCH ASSEMBLY.
Transmitter	ETACS-ECU does not receive any signal from the lock, unlock, trunk or panic switch.	N-7	Refer to INSPECTION PROCEDURE N-7: TRANSMITTER: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE LOCK, UNLOCK, TRUNK OR PANIC SWITCH.
ETACS-ECU does not receive any interior light loaded signal.		N-8	Refer to INSPECTION PROCEDURE N-8: ETACS-ECU DOES NOT RECEIVE ANY INTERIOR LIGHT LOADED SIGNAL.
ETACS-ECU does not receive any signal from hood switch.		N-9	Refer to INSPECTION PROCEDURE N-9: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM HOOD SWITCH.