SWS Monitor
If a problem is found in the Data List inspection, observe the table below.
SWS MONITOR INPUT SIGNAL CHART
| SYMPTOM | INSPECTION PROCEDURE | REFERENCE | |
|---|---|---|---|
| ETACS-ECU does not receive any signal from the ignition switch (ACC). | M-1 | Refer to INPUT SIGNAL PROCEDURES | |
| ETACS-ECU does not receive any signal from the ignition switch (IG1). | M-2 | Refer to INSPECTION PROCEDURE M-2: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE IGNITION SWITCH (IG1). | |
| ETACS-ECU does not receive any signal from the fog light switch. | M-3 | Refer to INSPECTION PROCEDURE M-3: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE FOG LIGHT SWITCH. | |
| ETACS-ECU does not receive one of signal from the front door switches. | M-4 | Refer to INSPECTION PROCEDURE M-4: ETACS-ECU DOES NOT RECEIVE ONE OF SIGNAL FROM THE FRONT DOOR SWITCHES. | |
| Column switch | ETACS-ECU does not receive any signal from the taillight switch. | M-5 | Refer to INSPECTION PROCEDURE M-5: COLUMN SWITCH: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE TAILLIGHT SWITCH, THE HEADLIGHT SWITCH, THE PASSING LIGHT SWITCH, THE DIMMER SWITCH OR THE TURN-SIGNAL LIGHT SWITCH. |
| ETACS-ECU does not receive any signal from the headlight switch. | |||
| ETACS-ECU does not receive any signal from the passing light switch. | |||
| ETACS-ECU does not receive any signal from the dimmer switch. | |||
| ETACS-ECU does not receive any signal from the turn-signal light switch. | |||
| ETACS-ECU does not receive any signal from the windshield mist wiper switch. | M-6 | Refer to INSPECTION PROCEDURE M-6: COLUMN SWITCH: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE WINDSHIELD MIST WIPER SWITCH, THE WINDSHIELD INTERMITTENT WIPER SWITCH, THE WINDSHIELD LOW-SPEED WIPER SWITCH, THE WINDSHIELD HIGH-SPEED WIPER SWITCH OR THE WINDSHIELD WASHER SWITCH. | |
| ETACS-ECU does not receive any signal from the windshield intermittent wiper switch. | |||
| ETACS-ECU does not receive any signal from the windshield low-speed wiper switch. | |||
| ETACS-ECU does not receive any signal from the windshield high-speed wiper switch. | |||
| ETACS-ECU does not receive any signal from the variable intermittent wiper control switch. | M-7 | Refer to INSPECTION PROCEDURE M-7: COLUMN SWITCH: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE VARIABLE INTERMITTENT WIPER CONTROL SWITCH. | |
| ETACS-ECU does not receive any signal from the windshield washer switch. | M-6 | Refer to INSPECTION PROCEDURE M-6: COLUMN SWITCH: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE WINDSHIELD MIST WIPER SWITCH, THE WINDSHIELD INTERMITTENT WIPER SWITCH, THE WINDSHIELD LOW-SPEED WIPER SWITCH, THE WINDSHIELD HIGH-SPEED WIPER SWITCH OR THE WINDSHIELD WASHER SWITCH. | |
| Sunroof switch | ETACS-ECU does not receive any signal from the up, open or close/down switch. | M-8 | Refer to INSPECTION PROCEDURE M-8: SUNROOF SWITCH: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE UP, OPEN OR CLOSE/DOWN SWITCH. |