LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2012 >> Galant FE >> Repair and Diagnosis >> Electrical >> Body Electrical >> Simplified Wiring System (SWS) >> Diagnostic Trouble Code Chart

Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART

DTC NO. DESCRIPTION REFERENCE
U1700 Malfunction in the SWS communication line Refer to U1700 
U1701(1) Communication error in the column switch Refer to U1701 
U1702(1) Communication error in the front-ECU Refer to U1702 
U1703(1) Communication error in the sunroof-ECU or the sunroof not installed Refer to U1703 
U1704(1)(2) Communication error in the power window main switch -
U1073 Bus off Refer to U1073 
U1100(1) Powertrain control module time-out (related to engine) Refer to U1100  or U1101 
U1101(1) Powertrain control module time-out (related to A/T)
U1108(1) Combination meter time-out Refer to U1108 
U1110(1) A/C-ECU time-out Refer to U1110 
U1111(1) Multi-center display unit (Mitsubishi Multi Communication System) time-out Refer to U1111 
U1128 Failure information on combination meter Refer to U1128 
B1702(2) Reception error of transponder data Refer to IMMOBILIZER SYSTEM .
B1703(2) Transponder data inconsistent
B1731 Immobilizer communication failure.
B1761 VIN not recorded
(1) When the DTC relating to the CAN communication error are output, make sure of the vehicle equipment. When the vehicle is not equipped with the system the ETACS-ECU communicates to, the DTC is always output. This is not abnormal.
(2) The diagnostic trouble code for the past problem is not sent.
scientia non olet · About LEMON Manuals