| Tone alarm |
General description concerning the tone alarm |
- |
Refer to TONE ALARM |
| Ignition key reminder tone alarm function does not work normally. |
B-1 |
Refer to INSPECTION PROCEDURE B-1: TONE ALARM: IGNITION KEY REMINDER TONE ALARM FUNCTION DOES NOT WORK NORMALLY. |
| Light reminder tone alarm function does not work normally. |
B-2 |
Refer to INSPECTION PROCEDURE B-2: TONE ALARM: LIGHT REMINDER TONE ALARM FUNCTION DOES NOT WORK NORMALLY. |
| Seat belt tone alarm function does not work normally. |
B-3 |
Refer to INSPECTION PROCEDURE B-3: TONE ALARM: SEAT BELT TONE ALARM FUNCTION DOES NOT WORK NORMALLY. |
| Door ajar warning buzzer function does not work normally. |
B-4 |
Refer to INSPECTION PROCEDURE B-4: TONE ALARM: DOOR AJAR WARNING BUZZER FUNCTION DOES NOT WORK NORMALLY. |
| The multi-center display (Mitsubishi Multi Communication system) does not sound normally when it is operated |
B-5 |
Refer to INSPECTION PROCEDURE B-5: TONE ALARM: THE MULTI-CENTER DISPLAY (MITSUBISHI MULTI COMMUNICATION SYSTEM) DOES NOT SOUND NORMALLY WHEN IT IS OPERATED. |
| Turn-signal light buzzer function does not work normally. |
B-6 |
Refer to INSPECTION PROCEDURE B-6: TONE ALARM: TURN-SIGNAL LIGHT BUZZER FUNCTION DOES NOT WORK NORMALLY. |
| Central door locking system |
General description concerning central door locking system |
- |
Refer to CENTRAL DOOR LOCKING SYSTEM |
| The central door locking system does not work at all. |
C-1 |
Refer to INSPECTION PROCEDURE C-1: CENTRAL DOOR LOCKING SYSTEM: THE CENTRAL DOOR LOCKING SYSTEM DOES NOT WORK AT ALL. |
| Some doors do not lock or unlock. |
C-2 |
Refer to INSPECTION PROCEDURE C-2: CENTRAL DOOR LOCKING SYSTEM: SOME DOORS DO NOT LOCK OR UNLOCK. |
| None of the doors lock and unlock with just the door lock switch operation. |
C-3 |
Refer to INSPECTION PROCEDURE C-3: CENTRAL DOOR LOCKING SYSTEM: NONE OF THE DOORS LOCK AND UNLOCK WITH JUST THE DOOR LOCK SWITCH OPERATION. |
| None of the doors lock and unlock with just the driver's or front passenger's inside lock knob operation. |
C-4 |
Refer to INSPECTION PROCEDURE C-4: CENTRAL DOOR LOCKING SYSTEM: NONE OF THE DOORS LOCK AND UNLOCK WITH JUST THE DRIVER'S OR FRONT PASSENGER'S INSIDE LOCK KNOB OPERATION. |
| Forgotten key prevention function does not work normally. |
C-5 |
Refer to INSPECTION PROCEDURE C-5: CENTRAL DOOR LOCKING SYSTEM: FORGOTTEN KEY PREVENTION FUNCTION DOES NOT WORK NORMALLY. |
| Power windows |
General description concerning the power windows |
- |
Refer to POWER WINDOWS |
| Power windows do not work at all. |
D-1 |
Refer to INSPECTION PROCEDURE D-1: POWER WINDOWS: POWER WINDOWS DO NOT WORK AT ALL. |
| The power window timer function does not work normally. |
D-2 |
Refer to INSPECTION PROCEDURE D-2: POWER WINDOW: THE POWER WINDOW TIMER FUNCTION DOES NOT WORK NORMALLY. |
| Only the front door window (LH) does not work by operating power window main switch. |
D-3 |
Refer to INSPECTION PROCEDURE D-3: POWER WINDOW: ONLY THE FRONT DOOR WINDOW (LH) DOES NOT WORK BY OPERATING POWER WINDOW MAIN SWITCH. |
| Power windows do not work normally by operating the front passenger's or rear passenger's sub switches. |
D-4 |
Refer to INSPECTION PROCEDURE D-4: POWER WINDOW: POWER WINDOWS DO NOT WORK NORMALLY BY OPERATING THE FRONT PASSENGER'S OR REAR PASSENGER'S SUB SWITCHES. |
| Front or rear passenger's power windows do not work at all by operating the power window main switch. |
D-5 |
Refer to INSPECTION PROCEDURE D-5: POWER WINDOW: FRONT OR REAR PASSENGER'S POWER WINDOWS DO NOT WORK AT ALL BY OPERATING THE POWER WINDOW MAIN SWITCH. |
| Keyless entry system |
General description concerning the keyless entry system |
- |
Refer to DIAGNOSIS |
| Keyless entry system does not operate. |
E-1 |
Refer to INSPECTION PROCEDURE E-1: KEYLESS ENTRY SYSTEM: KEYLESS ENTRY SYSTEM DOES NOT OPERATE. |
| The dome light, the turn-signal lights and the horn do not operate through the answerback function. |
E-2 |
Refer to INSPECTION PROCEDURE E-2: KEYLESS ENTRY SYSTEM: THE DOME LIGHT, THE TURN-SIGNAL LIGHTS AND THE HORN DO NOT OPERATE THROUGH THE ANSWERBACK FUNCTION. |
| Encrypted code cannot be registered. |
E-3 |
Refer to INSPECTION PROCEDURE E-3: KEYLESS ENTRY SYSTEM: ENCRYPTED CODE CANNOT BE REGISTERED. |
| The trunk is not opened when the keyless entry transmitter "TRUNK" button is operated. |
E-4 |
Refer to INSPECTION PROCEDURE E-4: KEYLESS ENTRY SYSTEM: THE TRUNK IS NOT OPENED WHEN THE KEYLESS ENTRY TRANSMITTER "TRUNK" BUTTON IS OPERATED. |
| Sunroof |
General description concerning the sunroof |
- |
Refer to SUNROOF |
| Sunroof does not operate. |
F-1 |
Refer to INSPECTION PROCEDURE F-1: SUNROOF: SUNROOF DOES NOT OPERATE. |
| One of the sunroof switch positions is defective. |
F-2 |
Refer to INSPECTION PROCEDURE F-2: SUNROOF: ONE OF THE SUNROOF SWITCH POSITIONS IS DEFECTIVE. |
| Sunroof timer function does not work normally. |
F-3 |
Refer to INSPECTION PROCEDURE F-3: SUNROOF: SUNROOF TIMER FUNCTION DOES NOT WORK NORMALLY. |
| Windshield wiper and washer |
General description concerning the windshield wiper and washer |
- |
Refer to WINDSHIELD WIPER AND WASHER |
| The windshield wiper do not work at all. |
G-1 |
Refer to INSPECTION PROCEDURE G-1: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD WIPER DO NOT WORK AT ALL. |
| The windshield wipers do not work when the windshield wiper switch is at "INT" or "MIST" position or the windshield washer switch is at "ON" position. However, the wipers work at low speed when the windshield wiper switch is at "LO" or "HI." |
G-2 |
Refer to INSPECTION PROCEDURE G-2: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD WIPERS DO NOT WORK WHEN THE WINDSHIELD WIPER SWITCH IS AT "INT" OR "MIST" POSITION OR THE WINDSHIELD WASHER SWITCH IS AT "ON" POSITION. HOWEVER, THE WIPERS WORK AT LOW SPEED WHEN THE WINDSHIELD WIPER SWITCH IS AT "LO" OR "HI." |
| All of the windshield wiper switch positions are defective. |
G-3 |
Refer to INSPECTION PROCEDURE G-3: WINDSHIELD WIPER AND WASHER: ALL OF THE WINDSHIELD WIPER SWITCH POSITIONS ARE DEFECTIVE. |
| Windshield wipers does not stop at the predetermined park position. |
G-4 |
Refer to INSPECTION PROCEDURE G-4: WINDSHIELD WIPER AND WASHER: WINDSHIELD WIPERS DOES NOT STOP AT THE PREDETERMINED PARK POSITION. |
| The windshield intermittent wiper interval cannot be adjusted by using the variable intermittent wiper control switch. |
G-5 |
Refer to INSPECTION PROCEDURE G-5: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD INTERMITTENT WIPER INTERVAL CANNOT BE ADJUSTED BY USING THE VARIABLE INTERMITTENT WIPER CONTROL SWITCH. |
| The windshield intermittent wiper interval is not changed according to the vehicle speed. |
G-6 |
Refer to INSPECTION PROCEDURE G-6: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD INTERMITTENT WIPER INTERVAL IS NOT CHANGED ACCORDING TO THE VEHICLE SPEED. |
| The windshield washer does not work. |
G-7 |
Refer to INSPECTION PROCEDURE G-7: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD WASHER DOES NOT WORK. |
| Headlight and taillight |
General description concerning the headlight and taillight |
- |
Refer to HEADLIGHT AND TAILLIGHT |
| The taillights do not illuminate normally. |
H-1 |
Refer to INSPECTION PROCEDURE H-1: HEADLIGHT AND TAILLIGHT: THE TAILLIGHTS DO NOT ILLUMINATE NORMALLY. |
| The headlights (low-beam) do not illuminate normally. |
H-2 |
Refer to INSPECTION PROCEDURE H-2: HEADLIGHT AND TAILLIGHT: THE HEADLIGHTS (LOW-BEAM) DO NOT ILLUMINATE NORMALLY. |
| The headlights (high-beam) do not illuminate normally. |
H-3 |
Refer to INSPECTION PROCEDURE H-3: HEADLIGHT AND TAILLIGHT: THE HEADLIGHTS (HIGH-BEAM) DO NOT ILLUMINATE NORMALLY. |
| When the passing switch is turned "ON," the headlights (low-beam and high-beam) do not illuminate. |
H-4 |
Refer to INSPECTION PROCEDURE H-4: HEADLIGHT AND TAILLIGHT: WHEN THE PASSING SWITCH IS TURNED "ON," THE HEADLIGHTS (LOW-BEAM AND HIGH-BEAM) DO NOT ILLUMINATE. |
| The headlamps illuminate at low-beam (high-beam does not illuminate) regardless of the lighting switch positions. |
H-5 |
Refer to INSPECTION PROCEDURE H-5: HEADLIGHT AND TAILLIGHT: THE HEADLAMPS ILLUMINATE AT LOW-BEAM (HIGH-BEAM DOES NOT ILLUMINATE) REGARDLESS OF THE LIGHTING SWITCH POSITIONS. |
| The taillights, front parking lights, the front side marker lights or the license plate light do not illuminate. |
H-6 |
Refer to INSPECTION PROCEDURE H-6: HEADLIGHT AND TAILLIGHT: THE TAILLIGHTS, THE FRONT PARKING LIGHTS, THE FRONT SIDE MARKER LIGHTS OR THE LICENSE PLATE LIGHT DO NOT ILLUMINATE. |
| One of the headlights does not illuminate. |
H-7 |
Refer to INSPECTION PROCEDURE H-7: HEADLIGHT AND TAILLIGHT: ONE OF THE HEADLIGHTS DOES NOT ILLUMINATE. |
| The high-beam indicator light does not illuminate. |
H-8 |
Refer to INSPECTION PROCEDURE H-8: HEADLIGHT AND TAILLIGHT: THE HIGH-BEAM INDICATOR LIGHT DOES NOT ILLUMINATE. |
| Headlight automatic shutoff function does not work normally. |
H-9 |
Refer to INSPECTION PROCEDURE H-9: HEADLIGHT AND TAILLIGHT: HEADLIGHT AUTOMATIC SHUTOFF FUNCTION DOES NOT WORK NORMALLY. |
| Headlight dimmer switch automatic resetting function does not work normally. |
H-10 |
Refer to INSPECTION PROCEDURE H-10: HEADLIGHT AND TAILLIGHT: HEADLIGHT DIMMER SWITCH AUTOMATIC RESETTING FUNCTION DOES NOT WORK NORMALLY. |
| Daytime running light function does not work normally. |
H-11 |
Refer to INSPECTION PROCEDURE H-11: HEADLIGHT AND TAILLIGHT: DAYTIME RUNNING LIGHT FUNCTION DOES NOT WORK NORMALLY. |
| Flasher timer |
General description concerning the flasher timer |
- |
Refer to FLASHER TIMER |
| Turn-signal lights do not flash when the turn-signal light switch is turned on. |
I-1 |
Refer to INSPECTION PROCEDURE I-1: FLASHER TIMER: TURN-SIGNAL LIGHTS DO NOT FLASH WHEN THE TURN-SIGNAL LIGHT SWITCH IS TURNED ON. |
| Hazard warning lights do not flash when the hazard warning light switch is turned on. |
I-2 |
Refer to INSPECTION PROCEDURE I-2: FLASHER TIMER: HAZARD WARNING LIGHTS DO NOT FLASH WHEN THE HAZARD WARNING LIGHT SWITCH IS TURNED ON. |
| One of the turn-signal lights does not illuminate. |
I-3 |
Refer to INSPECTION PROCEDURE I-3: FLASHER TIMER: ONE OF THE TURN-SIGNAL LIGHTS DOES NOT ILLUMINATE. |
| The turn-signal light indicator does not illuminate normally. |
I-4 |
Refer to INSPECTION PROCEDURE I-4: FLASHER TIMER: THE TURN-SIGNAL LIGHT INDICATOR DOES NOT ILLUMINATE NORMALLY. |
| Fog light |
General description concerning the fog lights |
- |
Refer to FOG LIGHT |
| Fog lights do not illuminate when the fog light switch is turned on. |
J-1 |
Refer to INSPECTION PROCEDURE J-1: FOG LIGHT: FOG LIGHTS DO NOT ILLUMINATE WHEN THE FOG LIGHT SWITCH IS TURNED ON. |
| Fog lights do not go out when the headlights (low-beam) are turned off while the fog lights are on. |
J-2 |
Refer to INSPECTION PROCEDURE J-2: FOG LIGHT: FOG LIGHTS DO NOT GO OUT WHEN THE HEADLIGHTS (LOW-BEAM) ARE TURNED OFF WHILE THE FOG LIGHTS ARE ON. |
| One of the fog lights does not illuminate. |
J-3 |
Refer to INSPECTION PROCEDURE J-2: FOG LIGHT: FOG LIGHTS DO NOT GO OUT WHEN THE HEADLIGHTS (LOW-BEAM) ARE TURNED OFF WHILE THE FOG LIGHTS ARE ON. |
| The fog light indicator does not illuminate normally. |
J-4 |
Refer to INSPECTION PROCEDURE J-4: FOG LIGHT: THE FOG LIGHT INDICATOR DOES NOT ILLUMINATE NORMALLY. |
| Interior light |
General description concerning the interior light |
- |
Refer to INTERIOR LIGHT |
| The dome light do not illuminate and go out normally. |
K-1 |
Refer to INSPECTION PROCEDURE K-1: INTERIOR LIGHT: THE DOME LIGHT DO NOT ILLUMINATE AND GO OUT NORMALLY. |
| The map lights, rear dome light or trunk light do not illuminate or go out normally. |
K-2 |
Refer to INSPECTION PROCEDURE K-2: INTERIOR LIGHT: THE MAP LIGHT, REAR DOME LIGHT OR TRUNK LIGHT DO NOT ILLUMINATE OR GO OUT NORMALLY. |
| Dome light dimming function does not work normally. |
K-3 |
Refer to INSPECTION PROCEDURE K-3: INTERIOR LIGHT: DOME LIGHT DIMMING FUNCTION DOES NOT WORK NORMALLY. |
| The ignition key hole illumination light does not illuminate or go out normally. |
K-4 |
Refer to INSPECTION PROCEDURE K-4: INTERIOR LIGHT: THE IGNITION KEY HOLE ILLUMINATION LIGHT DOES NOT ILLUMINATE OR GO OUT NORMALLY. |
| The interior light automatic shutoff function does not work normally. |
K-5 |
Refer to INSPECTION PROCEDURE K-5: INTERIOR LIGHT: THE INTERIOR LIGHT AUTOMATIC SHUTOFF FUNCTION DOES NOT WORK NORMALLY. |
| The door ajar indicator lights do not illuminate or go out normally |
K-6 |
Refer to INSPECTION PROCEDURE K-6: INTERIOR LIGHT: THE DOOR AJAR INDICATOR LIGHTS DO NOT ILLUMINATE OR GO OUT NORMALLY |
| The seat belt warning light do not illuminate or go out normally |
K-7 |
Refer to INSPECTION PROCEDURE K-7: INTERIOR LIGHT: THE SEAT BELT WARNING LIGHT DO NOT ILLUMINATE OR GO OUT NORMALLY |
| Can not customize the functions by operating the multi-center display (Mitsubishi Multi Communication System). |
L-1 |
Refer to INSPECTION PROCEDURE L-1: CAN NOT CUSTOMIZE THE FUNCTIONS BY OPERATING THE MULTI-CENTER DISPLAY (MITSUBISHI MULTI COMMUNICATION SYSTEM). |
| Theft-alarm system |
General description concerning the theft-alarm system |
- |
Refer to THEFT-ALARM SYSTEM |
| Theft-alarm system is not armed (theft-alarm indicator does not illuminate). |
O-1 |
Refer to INSPECTION PROCEDURE O-1: THEFT-ALARM SYSTEM: THEFT-ALARM SYSTEM IS NOT ARMED (THEFT-ALARM INDICATOR DOES NOT ILLUMINATE). |
| The theft-alarm system is not armed. |
O-2 |
Refer to INSPECTION PROCEDURE O-2: THEFT-ALARM SYSTEM: THE THEFT-ALARM SYSTEM IS NOT ARMED. |
| Horn does not sound when the theft-alarm system is triggered. |
O-3 |
Refer to INSPECTION PROCEDURE O-3: THEFT-ALARM SYSTEM: HORN DOES NOT SOUND WHEN THE THEFT-ALARM SYSTEM IS TRIGGERED. |
| Headlights (high-beam) do not flash when the theft-alarm system is triggered. |
O-4 |
Refer to INSPECTION PROCEDURE O-3: THEFT-ALARM SYSTEM: HORN DOES NOT SOUND WHEN THE THEFT-ALARM SYSTEM IS TRIGGERED. |
| Panic alarm function does not work. |
O-5 |
Refer to INSPECTION PROCEDURE O-5: THEFT-ALARM SYSTEM: PANIC ALARM FUNCTION DOES NOT WORK. |