Pad Wear Check
WARNING:
- Always replace both brake pads on each wheel as a set (both front wheels or both rear wheels). Failure to do so will result in uneven braking, which may cause unreliable brake operation.
- If there is significant difference in the thickness of the pads on the left and right sides, check the sliding condition of the piston and slide pins.
- Measure thickness at the thinnest and most worn area of the pad.
Standard value: 10 mm (0.39 inch)
Limit: 2.0 mm (0.08 inch)
- Replace the pad assembly if pad thickness is less than the limit value.