LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2011 >> Endeavor LS, AWD >> Repair and Diagnosis >> Maintenance >> Procedures >> General Information >> Maintenance Service >> 12. Transfer Oil >> Transfer Oil Level Check

Transfer Oil Level Check

  1. Remove the filler plug.
  2. Check that the oil level is just below the lower edge of the oil filler plug hole.
  3. Check that the oil is not excessively foul and has moderate viscosity.
  4. Install the oil filler plug and new gasket, then tighten them to the specified torque.

    Tightening torque: 32 ± 2 N.m (24 ± 1 ft-lb) 

    Fig 1: Checking Transfer Oil Level
    G05393892Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals