| Tone alarm |
General description concerning the tone alarm function |
- |
TONE ALARM |
| Ignition key reminder tone alarm function does not work normally. |
B-1 |
INSPECTION PROCEDURE B-1: TONE ALARM: IGNITION KEY REMINDER TONE ALARM FUNCTION DOES NOT WORK NORMALLY. |
| Light reminder tone alarm function does not work normally. |
B-2 |
INSPECTION PROCEDURE B-2: TONE ALARM: LIGHT REMINDER TONE ALARM FUNCTION DOES NOT WORK NORMALLY. |
| Seat belt tone alarm function does not work normally. |
B-3 |
INSPECTION PROCEDURE B-3: TONE ALARM: SEAT BELT TONE ALARM FUNCTION DOES NOT WORK NORMALLY. |
| Door-ajar warning tone alarm function does not work normally. |
B-4 |
INSPECTION PROCEDURE B-4: TONE ALARM: DOOR-AJAR WARNING TONE ALARM FUNCTION DOES NOT WORK NORMALLY. |
| The multi-center display does not sound normally when it is operated. <multi-center display (middle-grade type) or vehicles with Mitsubishi multi communication system> |
B-5 |
INSPECTION PROCEDURE B-5: TONE ALARM: THE MULTI-CENTER DISPLAY DOES NOT SOUND NORMALLY WHEN IT IS OPERATED. <MULTI-CENTER DISPLAY (MIDDLE-GRADE TYPE) OR VEHICLES WITH MITSUBISHI MULTI COMMUNICATION SYSTEM> |
| Turn-signal light tone alarm function does not work normally. |
B-6 |
INSPECTION PROCEDURE B-6: TONE ALARM: TURN-SIGNAL LIGHT BUZZER FUNCTION DOES NOT WORK NORMALLY. |
| Central door locking system |
General description concerning central door locking system |
- |
CENTRAL DOOR LOCKING SYSTEM |
| The central door locking system does not work at all. |
C-1 |
INSPECTION PROCEDURE C-1: CENTRAL DOOR LOCKING SYSTEM: THE CENTRAL DOOR LOCKING SYSTEM DOES NOT WORK AT ALL. |
| Some doors do not lock or unlock. (except liftgate and glass hatch lock) |
C-2 |
INSPECTION PROCEDURE C-2: CENTRAL DOOR LOCKING SYSTEM: SOME DOORS DO NOT LOCK OR UNLOCK. (EXCEPT LIFTGATE AND GLASS HATCH LOCK) |
| The liftgate lock does not work. |
C-3 |
INSPECTION PROCEDURE C-3: CENTRAL DOOR LOCKING SYSTEM: THE LIFTGATE LOCK DOES NOT WORK. |
| None of the doors lock and unlock with just the door lock switch operation. |
C-4 |
INSPECTION PROCEDURE C-4: CENTRAL DOOR LOCKING SYSTEM: NONE OF THE DOORS LOCK AND UNLOCK WITH JUST THE DOOR LOCK SWITCH OPERATION. |
| None of the doors lock and unlock with just the driver's or front passenger's inside lock knob operation. |
C-5 |
INSPECTION PROCEDURE C-5: CENTRAL DOOR LOCKING SYSTEM: NONE OF THE DOORS LOCK AND UNLOCK WITH JUST THE DRIVER'S OR FRONT PASSENGER'S INSIDE LOCK KNOB OPERATION. |
| Forgotten key prevention function does not work normally. |
C-6 |
INSPECTION PROCEDURE C-6: CENTRAL DOOR LOCKING SYSTEM: FORGOTTEN KEY PREVENTION FUNCTION DOES NOT WORK NORMALLY. |
| Power windows |
General description concerning the power windows |
- |
POWER WINDOWS |
| Power windows do not work at all. |
D-1 |
INSPECTION PROCEDURE D-1: POWER WINDOWS: POWER WINDOWS DO NOT WORK AT ALL. |
| The power window timer function does not work normally. |
D-2 |
INSPECTION PROCEDURE D-2: POWER WINDOWS: THE POWER WINDOW TIMER FUNCTION DOES NOT WORK NORMALLY. |
| Only the front door window (LH) does not work normally by operating the power window main switch. |
D-3 |
INSPECTION PROCEDURE D-3: POWER WINDOWS: ONLY THE FRONT DOOR WINDOW (LH) DOES NOT WORK NORMALLY BY OPERATING THE POWER WINDOW MAIN SWITCH. |
| Power windows do not work normally by operating the passenger's power window sub switches. |
D-4 |
INSPECTION PROCEDURE D-4: POWER WINDOWS: POWER WINDOWS DO NOT WORK NORMALLY BY OPERATING THE PASSENGER'S POWER WINDOW SUB SWITCHES. |
| Front or rear passenger's power windows do not work at all by operating the power window main switch. |
D-5 |
INSPECTION PROCEDURE D-5: POWER WINDOWS: FRONT OR REAR PASSENGER'S POWER WINDOWS DO NOT WORK AT ALL BY OPERATING THE POWER WINDOW MAIN SWITCH. |
| Keyless entry system |
General description concerning the keyless entry system |
- |
KEYLESS ENTRY SYSTEM |
| Keyless entry system does not operate. |
E-1 |
INSPECTION PROCEDURE E-1: KEYLESS ENTRY SYSTEM: KEYLESS ENTRY SYSTEM DOES NOT OPERATE. |
| The dome light, the turn-signal lights and the horn do not operate through the answerback function. |
E-2 |
INSPECTION PROCEDURE E-2: KEYLESS ENTRY SYSTEM: THE DOME LIGHT, THE TURN-SIGNAL LIGHTS AND THE HORN DO NOT OPERATE THROUGH THE ANSWERBACK FUNCTION. |
| Encrypted code cannot be registered. |
E-3 |
INSPECTION PROCEDURE E-3: KEYLESS ENTRY SYSTEM: ENCRYPTED CODE CANNOT BE REGISTERED. |
| Sunroof |
General description concerning the sunroof |
- |
SUNROOF |
| Sunroof does not operate. |
F-1 |
INSPECTION PROCEDURE F-1: SUNROOF: SUNROOF DOES NOT OPERATE. |
| Any of the sunroof switch positions is defective. |
F-2 |
INSPECTION PROCEDURE F-2: SUNROOF: ANY OF THE SUNROOF SWITCH POSITIONS IS DEFECTIVE. |
| Sunroof timer function does not work normally. |
F-3 |
INSPECTION PROCEDURE F-3: SUNROOF: SUNROOF TIMER FUNCTION DOES NOT WORK NORMALLY. |
| Safety mechanism does not function. |
F-4 |
INSPECTION PROCEDURE F-4: SUNROOF: SAFETY MECHANISM DOES NOT FUNCTION. |
| Windshield wiper and washer |
General description concerning the windshield wiper and washer |
- |
WINDSHIELD WIPER AND WASHER |
| The windshield wiper does not work at all. |
G-1 |
INSPECTION PROCEDURE G-1: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD WIPER DOES NOT WORK AT ALL. |
| The windshield wipers do not work when the windshield wiper switch is at "INT" or "MIST" position or the windshield washer switch is at "ON" position. However, the wipers work at low speed when the windshield wiper switch is at "LO" or "HI." |
G-2 |
INSPECTION PROCEDURE G-2: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD WIPERS DO NOT WORK WHEN THE WINDSHIELD WIPER SWITCH IS AT "INT" OR "MIST" POSITION OR THE WINDSHIELD WASHER SWITCH IS AT "ON" POSITION. HOWEVER, THE WIPERS WORK AT LOW SPEED WHEN THE WINDSHIELD WIPER SWITCH IS AT "LO" OR "HI"
. |
| All of the windshield wiper switch positions are defective. |
G-3 |
INSPECTION PROCEDURE G-3: WINDSHIELD WIPER AND WASHER: ALL OF THE WINDSHIELD WIPER SWITCH POSITIONS ARE DEFECTIVE. |
| The windshield wipers does not stop at the predetermined park position. |
G-4 |
INSPECTION PROCEDURE G-4: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD WIPERS DOES NOT STOP AT THE PREDETERMINED PARK POSITION. |
| The windshield intermittent wiper interval cannot be adjusted by using the variable intermittent wiper control switch. |
G-5 |
INSPECTION PROCEDURE G-5: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD INTERMITTENT WIPER INTERVAL CANNOT BE ADJUSTED BY USING THE VARIABLE INTERMITTENT WIPER CONTROL SWITCH. |
| The windshield intermittent wiper interval does not change according to the vehicle speed. |
G-6 |
INSPECTION PROCEDURE G-6: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD INTERMITTENT WIPER INTERVAL DOES NOT CHANGE ACCORDING TO THE VEHICLE SPEED. |
| The windshield washer does not work. |
G-7 |
INSPECTION PROCEDURE G-7: WINDSHIELD WIPER AND WASHER: THE WINDSHIELD WASHER DOES NOT WORK. |
| Rear wiper and washer |
General description concerning the rear wiper and washer |
- |
REAR WIPER AND WASHER |
| Rear wiper does not work at all. |
H-1 |
INSPECTION PROCEDURE H-1: REAR WIPER AND WASHER: REAR WIPER DOES NOT WORK AT ALL. |
| Rear wiper does not stop at the predetermined park position. |
H-2 |
INSPECTION PROCEDURE H-2: REAR WIPER AND WASHER: REAR WIPER DOES NOT STOP AT THE PREDETERMINED PARK POSITION. |
| When the selector lever is moved to "R" position during the rear wiper operation, the rear wiper does not operate continuously. |
H-3 |
INSPECTION PROCEDURE H-3: REAR WIPER AND WASHER: WHEN THE SELECTOR LEVER IS MOVED TO "R" POSITION DURING THE REAR WIPER OPERATION, THE REAR WIPER DOES NOT OPERATE CONTINUOUSLY. |
| Rear washer does not operate. |
H-4 |
INSPECTION PROCEDURE H-4: REAR WIPER AND WASHER: REAR WASHER DOES NOT OPERATE. |
| Headlight and taillight |
General description concerning the headlight and taillight |
- |
HEADLIGHT AND TAILLIGHT |
| The taillights do not illuminate normally. |
I-1 |
INSPECTION PROCEDURE I-1: HEADLIGHT AND TAILLIGHT "THE TAILLIGHTS DO NOT ILLUMINATE NORMALLY.
" |
| The headlights (low-beam) do not illuminate normally. |
I-2 |
INSPECTION PROCEDURE I-2: HEADLIGHT AND TAILLIGHT: THE HEADLIGHTS (LOW-BEAM) DO NOT ILLUMINATE NORMALLY. |
| The headlights (high-beam) do not illuminate normally. |
I-3 |
INSPECTION PROCEDURE I-3: HEADLIGHT AND TAILLIGHT: THE HEADLIGHTS (HIGH-BEAM) DO NOT ILLUMINATE NORMALLY. |
| When the passing switch is turned "ON," the headlights (low-beam and high-beam) do not illuminate. |
I-4 |
INSPECTION PROCEDURE I-4: HEADLIGHT AND TAILLIGHT: WHEN THE PASSING SWITCH IS TURNED "ON," THE HEADLIGHTS (LOW-BEAM AND HIGH-BEAM) DO NOT ILLUMINATE. |
| The headlights illuminate at low-beam (high-beam does not illuminate) regardless of the lighting switch positions. |
I-5 |
INSPECTION PROCEDURE I-5: HEADLIGHT AND TAILLIGHT: THE HEADLIGHTS ILLUMINATE AT LOW-BEAM (HIGH-BEAM DOES NOT ILLUMINATE) REGARDLESS OF THE LIGHTING SWITCH POSITIONS. |
| The taillights, the side markers or the license plate lights do not illuminate. |
I-6 |
INSPECTION PROCEDURE I-6: HEADLIGHT AND TAILLIGHT: THE TAILLIGHTS, THE SIDE MARKERS OR THE LICENSE PLATE LIGHTS DO NOT ILLUMINATE. |
| One of the headlights does not illuminate. |
I-7 |
INSPECTION PROCEDURE I-7: HEADLIGHT AND TAILLIGHT: ONE OF THE HEADLIGHTS DOES NOT ILLUMINATE. |
| The high-beam indicator light does not illuminate. |
I-8 |
INSPECTION PROCEDURE I-8: HEADLIGHT AND TAILLIGHT: THE HIGH-BEAM INDICATOR LIGHT DOES NOT ILLUMINATE. |
| Headlight automatic shutdown function does not work normally. |
I-9 |
INSPECTION PROCEDURE I-9: HEADLIGHT AND TAILLIGHT: HEADLIGHT AUTOMATIC SHUTDOWN FUNCTION DOES NOT WORK NORMALLY. |
| Headlight dimmer switch automatic resetting function does not work normally. |
I-10 |
INSPECTION PROCEDURE I-10: HEADLIGHT AND TAILLIGHT: HEADLIGHT DIMMER SWITCH AUTOMATIC RESETTING FUNCTION DOES NOT WORK NORMALLY. |
| Daytime running light function does not work normally. <vehicles for CANADA> |
I-11 |
INSPECTION PROCEDURE I-11: HEADLIGHT AND TAILLIGHT: DAYTIME RUNNING LIGHT FUNCTION DOES NOT WORK NORMALLY. <VEHICLES FOR CANADA> |
| Flasher timer |
General description concerning the flasher timer |
- |
FLASHER TIMER |
| Turn-signal lights do not flash when the turn-signal light switch is turned on. |
J-1 |
INSPECTION PROCEDURE J-1: FLASHER TIMER: TURN-SIGNAL LIGHTS DO NOT FLASH WHEN THE TURN-SIGNAL LIGHT SWITCH IS TURNED ON. |
| Hazard warning lights do not flash when the hazard warning light switch is turned on. |
J-2 |
INSPECTION PROCEDURE J-2: FLASHER TIMER: HAZARD WARNING LIGHTS DO NOT FLASH WHEN THE HAZARD WARNING LIGHT SWITCH IS TURNED ON. |
| The right or left turn-signal light does not illuminate. |
J-3 |
INSPECTION PROCEDURE J-3: FLASHER TIMER: THE RIGHT OR LEFT TURN-SIGNAL LIGHT DOES NOT ILLUMINATE. |
| The turn-signal light indicator does not illuminate normally. |
J-4 |
INSPECTION PROCEDURE J-4: FLASHER TIMER: THE TURN-SIGNAL LIGHT INDICATOR DOES NOT ILLUMINATE NORMALLY. |
| Fog light |
General description concerning the fog lights |
- |
FOG LIGHT |
| Fog lights do not illuminate when the fog light switch is turned on. |
K-1 |
INSPECTION PROCEDURE K-1: FOG LIGHT: FOG LIGHTS DO NOT ILLUMINATE WHEN THE FOG LIGHT SWITCH IS TURNED ON. |
| Fog lights do not go out when the headlights (low-beam) are turned off while the fog lights are on. |
K-2 |
INSPECTION PROCEDURE K-2: FOG LIGHT: FOG LIGHTS DO NOT GO OUT WHEN THE HEADLIGHTS (LOW-BEAM) ARE TURNED OFF WHILE THE FOG LIGHTS ARE ON. |
| One of the fog lights does not illuminate. |
K-3 |
INSPECTION PROCEDURE K-3: FOG LIGHT: ONE OF THE FOG LIGHTS DOES NOT ILLUMINATE. |
| The fog light indicator does not illuminate normally. |
K-4 |
INSPECTION PROCEDURE K-4: FOG LIGHT: THE FOG LIGHT INDICATOR DOES NOT ILLUMINATE NORMALLY. |
| Interior light |
General description concerning the interior light |
- |
INTERIOR LIGHT |
| The dome light does not illuminate and go out normally. |
L-1 |
INSPECTION PROCEDURE L-1: INTERIOR LIGHT: THE DOME LIGHT DOES NOT ILLUMINATE AND GO OUT NORMALLY. |
| The dome lights, map lights, cargo area light or front door lights do not illuminate or go out normally. |
L-2 |
INSPECTION PROCEDURE L-2: INTERIOR LIGHT: THE DOME LIGHTS, MAP LIGHTS, CARGO AREA LIGHT OR FRONT DOOR LIGHTS DO NOT ILLUMINATE OR GO OUT NORMALLY. |
| Dome light dimming function does not work normally. |
L-3 |
INSPECTION PROCEDURE L-3: INTERIOR LIGHT: DOME LIGHT DIMMING FUNCTION DOES NOT WORK NORMALLY. |
| The ignition key hole illumination light does not illuminate or go out normally. |
L-4 |
INSPECTION PROCEDURE L-4: INTERIOR LIGHT: THE IGNITION KEY HOLE ILLUMINATION LIGHT DOES NOT ILLUMINATE OR GO OUT NORMALLY. |
| The interior light automatic shutdown function does not work normally. |
L-5 |
INSPECTION PROCEDURE L-5: INTERIOR LIGHT: THE INTERIOR LIGHT AUTOMATIC SHUTDOWN FUNCTION DOES NOT WORK NORMALLY. |
| The door ajar indicator lights do not illuminate or go out normally |
L-6 |
INSPECTION PROCEDURE L-6: INTERIOR LIGHT: THE DOOR AJAR INDICATOR LIGHTS DO NOT ILLUMINATE OR GO OUT NORMALLY. |
| When the interior light "ON" or "OFF" switch is operated, the dome lights do not illuminate or go out normally. |
L-7 |
INSPECTION PROCEDURE L-7: INTERIOR LIGHT: WHEN THE INTERIOR LIGHT "ON" OR "OFF" SWITCH IS OPERATED, THE DOME LIGHTS DO NOT ILLUMINATE OR GO OUT NORMALLY. |
| The seat belt warning light do not illuminate or go out normally. |
L-8 |
INSPECTION PROCEDURE L-8: INTERIOR LIGHT: THE SEAT BELT WARNING LIGHT DO NOT ILLUMINATE OR GO OUT NORMALLY. |
| Theft-alarm system |
General description concerning the theft-alarm system |
- |
THEFT-ALARM SYSTEM |
| Theft-alarm system is not armed (theft-alarm indicator light does not illuminate). |
M-1 |
INSPECTION PROCEDURE M-1: THEFT-ALARM SYSTEM: THEFT-ALARM SYSTEM IS NOT ARMED (THEFT-ALARM INDICATOR LIGHT DOES NOT ILLUMINATE). |
| Horn does not sound when the theft-alarm is triggered. |
M-2 |
INSPECTION PROCEDURE M-2: THEFT-ALARM SYSTEM: HORN DOES NOT SOUND WHEN THE THEFT-ALARM IS TRIGGERED. |
| Headlights (high-beam) do not flash when the theft-alarm system is triggered. |
M-3 |
INSPECTION PROCEDURE M-3: THEFT-ALARM SYSTEM: HEADLIGHTS (HIGH-BEAM) DO NOT FLASH WHEN THE THEFT-ALARM SYSTEM IS TRIGGERED. |
| Panic alarm function does not work. |
M-4 |
INSPECTION PROCEDURE M-4: THEFT-ALARM SYSTEM: PANIC ALARM FUNCTION DOES NOT WORK. |
| Can not customize the functions by operating the multi-center display (middle-grade type) or Mitsubishi multi communication system (MMCS). |
N-1 |
INSPECTION PROCEDURE N-1: CAN NOT CUSTOMIZE THE FUNCTIONS BY OPERATING THE MULTI-CENTER DISPLAY (MIDDLE-GRADE TYPE) OR MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS). |