How To Terminate The Service Mode
WARNING: This page is about a different variant/trim than selected.
If the operations below are done, the service mode will be terminated.
- If "Back" button is selected on "Service" screen, the service mode will terminate and then return to the previous screen.
- If "NAVI" button is pressed with the service mode active, the service mode will terminate and change to the navigation screen.NOTE: If "NAVI" button is pressed, the following functions of the service mode will terminate.
- Vehicle Signal Check
- Monitor Check
- Network/Connect Line Check
- Speaker Check
- Versions Indication
- Sensor Check
- Touch Switch Confirmation
- CAN communication Confirmation
- Memory Initialization
- Versions Log Information