LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2009 >> Raider 4D Pickup, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine & Emission Control >> Speed Control >> Installation

Speed Control: Installation

  1. Position switch to steering wheel.
  2. Install switch mounting screw and tighten to 1.7 N.m (15 in. lbs.).
  3. Plug electrical connector into switch.
  4. Install airbag module. Refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) - SERVICE INFORMATION .
  5. Connect negative battery cable to battery.
scientia non olet · About LEMON Manuals