Power Window Operating Current Check

Remove the power window fuse, and connect a multimeter as shown in the illustration.
Raise the power window to measure the current during operation.
Standard value: 7 A or less [Power supply voltage 14.5 ± 0.5 V, at 25°C (77°F)]

NOTE: If the power supply voltage does not meet the standard value, check and repair the generator and the battery. Then carry out this check again.

Fig 1: Identifying Power Window Fuse
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
If the operation current is outside the standard value, refer to TROUBLE SYMPTOM CHART < POWER WINDOW> .