LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2009 >> Outlander ES, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Body) >> Door >> On-Vehicle Service >> Power Window Operating Current Check

Power Window Operating Current Check

WARNING: This page is about a different car, the 2008 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power window fuse, and connect a multimeter as shown in the illustration.
  2. Raise the power window to measure the current during operation.

    Standard value: 7 A or less [Power supply voltage 14.5 ± 0.5 V, at 25°C (77°F)] 

    NOTE: If the power supply voltage does not meet the standard value, check and repair the generator and the battery. Then carry out this check again.
    Fig 1: Identifying Power Window Fuse
    G05432979Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. If the operation current is outside the standard value, refer to TROUBLE SYMPTOM CHART < POWER WINDOW> .
scientia non olet · About LEMON Manuals