LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2009 >> Outlander ES, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Intake And Exhaust) >> Intake Manifold >> Inspection >> Intake Manifold Check

Intake Manifold Check

WARNING: This page is about a different car, the 2008 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for damage or cracking of any part.
  2. Clogging of the negative pressure (vacuum) outlet port, or clogging of the exhaust gas recirculation passages.
  3. Using a straight edge and feeler gauge, check for distortion of the cylinder head installation surface.

    Standard value: 0.15 mm (0.006 inch) or less 

    Limit: 0.20 mm (0.008 inch) 

scientia non olet · About LEMON Manuals