LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2009 >> Lancer GTS, Automatic CVT >> Repair and Diagnosis >> Body & Frame >> Windows >> Body >> Door >> On-Vehicle Service >> Power Window Operating Current Check

Power Window Operating Current Check

  1. Remove the power window fuse, and connect a multimeter as shown in the illustration.
  2. Raise the power window to measure the current during operation.

    Standard value (A): 7 A or less [Power supply voltage 14.5 ± 0.5V, 25°C (77°F)] 

    NOTE: If the power supply voltage does not meet the standard value, check and repair the generator and the battery. Then carry out this check again.
  3. If the operation current is outside the standard value, refer to POWER WINDOW DIAGNOSIS  .
    Fig 1: Identifying Power Window Fuse And ETACS-ECU
    G05384152Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals