LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2009 >> Lancer ES, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle >> On-Vehicle Service >> Transaxle Oil Level Check

Transaxle Oil Level Check

  1. Remove the filler plug.
  2. Check that the oil level is up to the lower edge of the filler plug hole.
  3. Check that the oil is not noticeably dirty.
  4. Tighten the filler plug to the specified torque.

    Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb) 

    Fig 1: Identifying Filler Plug And Drain Plug
    G05374019Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Identifying Filler Plug And Oil Level
    G05374018Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals