LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander XLS, FWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> On-Vehicle Service >> Engine Oil Check

Engine Oil Check

  1. Pull out the oil dipstick, clean off the engine oil on the oil dipstick, and then reinsert the oil dipstick.
  2. Pull out the oil dipstick, and check the engine oil level is within the marks on one side of the oil dipstick (engine cover side).
    NOTE:
    • Checking the oil might be difficult shortly after stopping the engine or engine oil replacement.
    • If difficult, take some time (approx. 30 sec.) and try again.
    • Refer to the information label indicating the engine oil check process on the rocker cover.
      Fig 1: Identifying Oil Dipstick Level
      G05426304Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Check that the engine oil is not excessively dirty, that there is no coolant or gasoline mixed in, and that it is sufficiently thick and slippery.
scientia non olet · About LEMON Manuals