LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Lancer GTS, Automatic CVT >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System - Lancer >> Charging System >> Inspection >> Brush

Charging System: Inspection: Brush

  1. Measure the length of the protrusion of the brush. Replace the brush if the protrusion length is shorter than the limit.

    Limit: 2 mm (0.08 inch) minimum 

  2. Unsolder the lead of the brush. The brush will come out, becoming ready for removal.
    Fig 1: Identifying Protrusion Length Of Brush
    G05375425Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Install a new brush by pushing it into the holder as shown in illustration and soldering the lead.
Fig 2: Identifying Holder
G05375426Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals