Service Specifications
GENERAL SPECIFICATIONS
| Item | Standard value |
|---|---|
| Toe in mm (in) | 3 ± 2 (0.12 ± 0.08) |
| Camber | --1°00' ± 0°30' (Difference between right and left within 0°30') |
| Control link ball joint rotation starting torque N.m (in-lb) | 0.5 --2.5 (4.5 --22.1) |
| Control link slide bushing rotation starting torque N.m (in-lb) | 2.0 (17.7) or less |
| Lower arm pillow ball bushing rotation starting torque N.m (in-lb) | Rear suspension crossmember side: 3.0 (26.5) or less, Knuckle side: 9.8 (86.7) or less |
| Trailing arm ball joint rotation starting torque N.m (in-lb) | 0.5 --2.5 (4.5 --22.1) |
| Trailing arm pillow ball bushing rotation torque N.m (in-lb) | 1.5 (13.2) or less |
| Upper arm ball joint rotation starting torque N.m (in-lb) | 3.4 (30.0) or less |
| Upper arm pillow ball bushing rotation torque N.m (in-lb) | 1.5 (13.2) or less |
| Stabilizer link ball joint rotation torque N.m (in-lb) | 10 --30°C (50 --86°F): 0.2 --2.0 (1.8 --17.7) |
| Other than | 10 --30°C (50 --86°F): 0.2 --5.0 (1.8 --44.2) |