Using "All DTCS" On Mut-III (MTT-0308-02)

WARNING: This page is about the Lancer DE, Automatic CVT, which is a different variant/trim than selected.

Publication date: 2007-01-01
Reference number: MTT-0308-02

USING "ALL DTCS" ON MUT-III

TECHNICAL INFORMATION TIP - MANUFACTURER

Reference Number(s): MTT-0308-02, Date of Issue: January 01, 2007

MITSUBISHI MOTORS:

2007-08 Outlander, 2008-09 Lancer, 2008 Lancer EVO X

SERVICE INFORMATION

USING "ALL DTCS" ON MUT-III - 2007-08 Outlander, 2008-09 Lancer, 2008 Lancer EVO X . To select the systems to be read when using the "ALL DTCS" function of the scan tool, you may find that the Check Mark at the bottom of the page is not active (grayed out). This is due to additional information being needed to identify vehicle options within the systems listed, especially F.A.S.T. In the System List, some will be underlined. These systems have additional options that must be selected in order to complete the vehicle configuration information in the MUT-III and activate the Check Mark (e.g. RKE vs. F.A.S.T/IMMOB/-Keyless/TPMS). Click on underlined systems from the System List and select the correct Loading Option Setup for each underlined System until the check mark becomes active.