How To Terminate The Service Mode

If the operations below are done, the service mode will be terminated.

• If "Back" button is selected on "Service" screen, the service mode will terminate and then return to the previous screen.
• If "NAVI" button is pressed with the service mode active, the service mode will terminate and change to the navigation screen.
  Fig 1: Scan Tool Display - NAVI And SET Buttons

  Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  NOTE: If "NAVI" button is pressed, the following functions of the service mode will terminate.
  

  • Vehicle Signal Check
  • Monitor Check
  • Network/Connect Line Check
  • Speaker Check
  • Versions Indication
  • Sensor Check
  • Touch Switch Confirmation
  • CAN communication Confirmation
  • Memory Initialization
  • Versions Log Information
    Fig 2: Scan Tool Display - Back Button

    Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.