Hub Bolt Replacement

Required Special Tools: 

• MB990767: Front Hub and Flange Yoke Holder
• MB991618: Hub Bolt Remover

1. Remove the rear brake disk. (Refer to PARKING BRAKE LINING AND DRUM .)
2. Use special tool MB991618 to remove the hub bolts.
   Fig 1: Removing Hub Bolts With Special Tool (MB991618)

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
3. Install the plain washer to the new hub bolt, and install the bolt with a nut while holding the hub with special tool MB990767.
Fig 2: Holding Hub With Special Tool (MB990767)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
4. Install the rear brake disk. (Refer to PARKING BRAKE LINING AND DRUM .)