< 3.8L Engine >
FASTENER TIGHTENING SPECIFICATIONS (3.8L)
| ITEM | SPECIFICATION |
|---|---|
| Charging system | |
| Control wiring harness nut | 12 +/- 2 N.m (102 +/- 22 in-lb) |
| Engine oil dipstick and dipstick guide bolt | 14 +/- 1 N.m (120 +/- 13 in-lb) |
| Generator bolt | 49 +/- 9 N.m (36 +/- 7 ft-lb) |
| Generator bracket bolt | 49 +/- 9 N.m (36 +/- 7 ft-lb) |
| Harness bracket bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Ignition system | |
| Camshaft position sensor bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Crankshaft position sensor bolt | 8.5 +/- 0.5 N.m (76 +/- 4 in-lb) |
| Crankshaft position sensor clamp bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Crankshaft position sensor clip bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Ignition coil bolt | 10 +/- 2 N.m (89 +/- 17 in-lb) |
| Knock sensor | 23 +/- 2 N.m (17 +/- 1 ft-lb) |
| Knock sensor clip bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Spark plug | 25 +/- 4 N.m (18 +/- 3 ft-lb) |
| Starting system | |
| Starter bolt | 30 +/- 3 N.m (23 +/- 2 ft-lb) |
| Starter cover bolt | 4.9 +/- 1.0 N.m (44 +/- 8 in-lb) |
| Starter cover nut | 4.9 +/- 1.0 N.m (44 +/- 8 in-lb) |
| Starter terminal nut | 12 +/- 2 N.m (102 +/- 22 in-lb) |