LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Raider SE >> Repair and Diagnosis >> Steering >> Power Steering >> Steering Wheel >> Installation

Steering Wheel: Installation

NOTE: Do not reuse the old steering wheel bolt (4) (a new bolt must be used).
NOTE: Make sure to align the spline on the steering wheel hub to the column shaft.
  1. Install steering wheel (3) to the column (6).
    NOTE: Be certain that the steering wheel mounting bolt is tightened to the proper torque specification to ensure proper clockspring operation.
    Fig 1: Identifying Steering Wheel Bolt And Steering Wheel
    G04856796Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Install the new steering wheel bolt (4). Tighten the bolt to 61 N.m (45 ft. lbs.).
    Fig 2: Identifying Driver Side Airbag
    G04856793Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Install the driver's side air bag (3) to the steering wheel. Refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) - SERVICE INFORMATION article.
scientia non olet · About LEMON Manuals