LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Raider SE >> Repair and Diagnosis >> Steering >> Power Steering >> Pump >> Installation

Power Steering: Pump: Installation

  1. Align the pump (4) with the mounting holes on the engine.
    Fig 1: Identifying Pump, Pressure Hose And Pulley Access Hole
    G04856827Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Install 3 pump mounting bolts through the pulley access holes (1). Tighten the bolts to 28 N.m (21 ft. lbs.).
  3. Install the pressure hose (2) to the pump (4). Tighten the tube nut to 31 N.m (23 ft. lbs.).
    Fig 2: Identifying Reservoir Return Hose And Reservoir
    G04856826Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. Install reservoir return hose (3) to the reservoir (1).
  5. Install the serpentine drive belt. (Refer to INSTALLATION ).
  6. Fill the power steering pump. (Refer to POWER STEERING PUMP - INITIAL OPERATION ).
scientia non olet · About LEMON Manuals