LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Raider SE >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection >> Sensor - Intake Air Temperature >> Installation >> 3.7L V-6

3.7L V-6

  1. Check condition of sensor O-ring (2).
    Fig 1: Identifying Intake Manifold Air Temperature Sensor And Electrical Connector
    G04853275Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Clean sensor mounting hole in air intake tube.
  3. Position sensor into air intake tube and rotate clockwise until past release tab.
  4. Install electrical connector (1).
scientia non olet · About LEMON Manuals