Sensor - Variable Line Pressure: Removal

Fig 1: Identifying Line Pressure Sensor And Pressure Control Solenoid

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

1. Remove the valve body from the transmission. (Refer to AUTOMATIC TRANSMISSION SERVICE INFORMATION < 42RLE >/BODY - VALVE - REMOVAL ).
2. Remove the electrical connectors from the pressure control solenoid (1) and the line pressure sensor (2).
3. Remove the screws (6) holding the pressure control solenoid (1) and line pressure sensor (2) to the valve body.
4. Remove the pressure control solenoid and line pressure sensor from the valve body.