Scan Tool (Multi Use Tester { M.U.T.-III } Sub Assembly)

WARNING: This page is about a different car, the 2008 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Turn the ignition switch to the "LOCK" (OFF) position before disconnecting or connecting the scan tool.

NOTE: M.U.T.-III trigger harness is not necessary when pushing V.C.I. ENTER key.

Fig 1: Identifying Scan Tool (M.U.T.-III)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.