LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Outlander LS, AWD >> Repair and Diagnosis >> General Information >> OEM General Information >> Electrical >> How To Diagnose >> General Electrical System Check >> Continuity Check

Continuity Check

  1. When the switch is in the "OFF" position and the contact points of terminals 1 and 2 are connected, the self-powered test light should illuminate or the ohmmeter should read 0 ohm.
  2. When the switch is the "ON" position and the contact points of terminals 3 and 4 are connected, the self-powered test light should come on or the ohmmeter should read 0 ohm.
    Fig 1: Checking Short-Circuit (3 Of 3)
    G04869543Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals