LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Outlander LS, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Chassis Electrical >> Lighting >> Headlight Automatic Leveling System >> Inspection >> Height Sensor Check >> Rear Height Sensor Check

Rear Height Sensor Check

  1. Disconnect the sensor connector and connect the special tool test harness (MB991658) as shown.
  2. Turn the ignition switch to the ON position.
  3. Measure the voltage of sensor connector terminal No. 2.
    Fig 1: Measuring Voltage Of Sensor Connector Terminal No. 2
    G04873718Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. Check that voltages show the values described in the graph according to the sensor operation angle.
    Fig 2: Rear Height Sensor Voltage Graph
    G04873721Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals