LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Outlander LS, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Door >> On-Vehicle Service >> Power Window Operation Current Check

Power Window Operation Current Check

Fig 1: Checking Power Window Operation Current
G04872313Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  1. Remove the power window fuse, and connect a multimeter as shown in the illustration.
  2. Raise the power window to measure the current during operation.

    Standard value: 7 A or less [Power supply voltage 14.5 ± 0.5 V, at 25°C (77°F)] 

    NOTE: If the power supply voltage does not meet the standard value, check and repair the generator and the battery. Then carry out this check again.
  3. If the operation current is outside the standard value, refer to DOOR WINDOW GLASS ADJUSTMENT  .
scientia non olet · About LEMON Manuals