LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Outlander ES >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul >> Side Cover >> Disassembly And Assembly >> Disassembly

Disassembly And Assembly: Disassembly

  1. Remove the seal rings from the side cover.
    Fig 1: Identifying Seal Rings
    G04871435Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION: Ensure that the spring compressor (Special Tool: MB992196) is correctly set, directly above the return springs of the spring retainer assembly.
  2. While pushing the spring retainer assembly using a spring compressor (Special Tool: MB992196), remove the snap ring.
    Fig 2: Identifying Special Tools
    G04871436Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION: Do not remove the return springs from the spring retainer assembly.
  3. Remove the spring retainer assembly from the 2-6 brake piston.
    Fig 3: Identifying Return Springs
    G04871437Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION: Do not feed air abruptly. Otherwise, the 2-6 brake piston may become stuck in the side cover.
  4. Feed air through the oil hole as indicated in the illustration to remove the 2-6 brake piston from the side cover.

    Remove the D-rings from the 2-6 reverse brake piston.

    Fig 4: Feeding Air Through Oil Hole
    G04871438Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 5: Identifying D-Rings
    G04871439Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals