< 2.4L Engine >
GENERAL SPECIFICATIONS (2.4L ENGINE)
| ITEMS | SPECIFICATIONS |
|---|---|
| Generator | |
| Type | Positive battery positive voltage sensing |
| Identification number | A3TG1192 |
| Part No. | MN183450 |
| Rated output V/A | 12/110 |
| Voltage regulator | Electronic built-in type |
| Starter motor | |
| Type | Reduction drive with planetary gear |
| Identification number | M0T20672 |
| Part No. | 1810A001 |
| Rated output kW/V | 1.4/12 |
| No. of pinion teeth | 8 |
| Ignition coil | |
| Type | Molded 4 coil |
| Spark plugs | |
| NGK | LZFR6AI |
SERVICE SPECIFICATIONS
| ITEMS | STANDARD VALUE | LIMIT | ||
|---|---|---|---|---|
| Generator | ||||
| Regulated voltage (Ambient temperature at voltage regulator) | -20°C (-4°F) | 14.2 - 15.4 | - | |
| 20°C (68°F) | 13.9 - 14.9 | - | ||
| 60°C (140°F) | 13.4 - 14.5 | - | ||
| 80°C (176°F) | 13.1 - 14.5 | - | ||
| Generator output line voltage drop (at 30A) V | - | Maximum 0.3 | ||
| Output current | - | 70% of normal output current | ||
| Field coil resistance Ω | Approximately 2 - 5 | - | ||
| Brush protrusion length mm (in) | - | Minimum 2 (0.08) | ||
| Starter motor | ||||
| Free running characteristics | 2.0L Engine | Terminal voltage V | 11 | - |
| Current A | 90 | - | ||
| Speed r/min | 2,370 or more | - | ||
| 2.4L Engine | Terminal voltage V | 11 | - | |
| Current A | 90 | - | ||
| Speed r/min | 2,000 or more | - | ||
| Pinion gap mm (in) | 0.5 - 2.0 (0.02 - 0.07) | - | ||
| Commutator run-out mm (in) | 0.05 (0.002) | Minimum 0.1 (0.004) | ||
| Commutator diameter mm (in) | 29.4 (1.16) | Minimum 28.8 (1.13) | ||
| Undercut depth mm (in) | 0.5 (0.02) | Minimum 0.2 (0.008) | ||
| Ignition parts | ||||
| Ignition secondary coil resistance at 20°C (68°F) kΩ | 8.5 - 11.5 | - | ||
| Spark plug gap mm (in) | 2.0L Engine | 1.0 - 1.1 (0.039 - 0.043) | - | |
| 2.4L Engine | 0.7 - 0.8 (0.028 - 0.031) | 1.2 (0.047) | ||
| Resistor wire resistance kΩ | - | Maximum 19 | ||