LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Lancer Standard >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter Motor Assembly >> Inspection >> Brushes

Starter Motor Assembly: Inspection: Brushes

  1. Check the commutator contacting surface of each brush for abnormal roughness. Also check the height of the brush. Replace the brush holder if the height is lower than the limit.

    Limit: 7.0 mm (0.27 in) 

  2. When the contact surface of the brush is rectified or the brush holder is replaced, recondition the contact surface with sandpaper wrapped around the commutator.
    Fig 1: Checking Height Brush
    G04271555Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals