Operation Check

Check that the following items. If faulty, replace the sunroof-ECU (sunroof motor assembly).

CAUTION: Check that the following items are normal before carrying out this operation check.

Installation condition of the sunroof assembly
Installation condition, deforms and attached foreign material of the sunroof drive cable
Unfitted sunroof lid glass
Sunroof switch and sunroof motor assembly

Basic operation

SUNROOF FUNCTION - BASIC OPERATION

NO.	SUNROOF FUNCTION	REQUIREMENTS FOR THE SUNROOF TO FUNCTION		NORMAL OPERATION
01	OPEN	Ignition switch: ON Sunroof switch: OPEN		The sunroof opens fully and automatically.
02	CLOSE	Ignition switch: ON Sunroof switch: CLOSE/TILT-DOWN		The sunroof closes while the sunroof switch is pushed to the CLOSE/TILT-DOWN position.
03	TILT-UP	Ignition switch: ON Sunroof switch: TILT-UP		The sunroof tilts up fully and automatically.
04	TILT-DOWN	Ignition switch: ON Sunroof switch: CLOSE/TILT-DOWN		The sunroof closes while the sunroof switch is pushed to the CLOSE/TILT-DOWN position.
05	AUTOMATIC OPERATION INTERRUPTION	A	Ignition switch: ON Sunroof switch: TILT-UP or CLOSE/TILT DOWN (Push the sunroof switch to the CLOSE/TILT-DOWN position while the sunroof is automatically opening and release the switch within two seconds)	The sunroof stops the automatic opening operation.
05	AUTOMATIC OPERATION INTERRUPTION	B	Ignition switch: ON Sunroof switch: CLOSE/TILT DOWN (Push the sunroof switch to the CLOSE/TILT-DOWN position more than two seconds while the sunroof is automatically opening)	The sunroof stops the automatic opening operation, and the sunroof closes while the sunroof switch is pushed to the CLOSE/TILT-DOWN position.