LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Outlander SE, FWD >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> On-Vehicle Service >> Spark Plug Test

Spark Plug Test

  1. Remove the spark plug and connect to the ignition coil.
    Fig 1: Checking For Spark
    G04237126Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Ground the spark plug outer electrode (body), and crank the engine.

    Check that there is an electrical discharge between the electrodes at this time.

    Fig 2: Grounding Spark Plug Outer Electrode
    G04302104Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals