LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Outlander Limited, FWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Chassis Electrical >> Combination Meter Assembly And Vehicle Speed Sensor >> On-Vehicle Service >> Fuel Level Sensor Check < Fwd > >> Fuel Level Sensor Float Height

Fuel Level Sensor Float Height

  1. Move the float and measure height A at point "F" (highest) and B at point "E" (lowest) with the float arm touching stopper.

    Standard value: 

    • A: 35.4 mm (1.39 inches) 
    • B: 186.7 mm (7.35 inches) 
  2. Adjust the float arm to the standard value, then go to the thermistor check.
Fig 1: Checking Fuel Level Sensor Float Height
G04305233Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals