Service Specifications
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | MINIMUM LIMIT |
|---|---|---|
| Input shaft front bearing end play mm (in) | 0 -0.12 (0 -0.0047) | - |
| Input shaft rear bearing end play mm (in) | 0 -0.12 (0 -0.0047) | - |
| Input shaft 5th speed gear end play mm (in) | 0 -0.09 (0 -0.0035) | - |
| Output shaft roller bearing inner race end play mm (in) | 0 -0.12 (0 -0.0047) | - |
| Output shaft 3rd speed gear end play mm (in) | 0 -0.09 (0 -0.0035) | - |
| Output shaft ball bearing end play mm (in) | 0 -0.09 (0 -0.0035) | - |
| Backlash between differential side gear and pinion mm (in) < F5M42 > | 0 -0.150 (0 -0.0059) | - |
| Backlash between center differential side gear and pinion mm (in) < W5M42 > | 0.025 -0.150 (0.0001 -0.0059) | - |
| Differential case preload mm (in) | 0.05 -0.11 (0.0020 -0.0043) | - |
| Synchronizer ring back surface to gear clearance mm (in) | - | 0.5 (0.020) |