Fastener Tightening Specifications
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Charging system | |
| Connector bracket bolt | 11 +/- 1 N. m (98 +/- 8 in-lb) |
| Generator bolt | 49 +/- 9 N. m (36 +/- 7 ft-lb) |
| Generator mounting bracket bolt | 49 +/- 9 N. m (36 +/- 7 ft-lb) |
| Generator nut | 44 +/- 10 N. m (33 +/- 7 ft-lb) |
| Generator terminal nut | 14 +/- 3 N. m (124 +/- 26 in-lb) |
| Harness bracket bolt | 11 +/- 1 N. m (98 +/- 8 in-lb) |
| Starting system | |
| Starter bolt | 30 +/- 3 N. m (23 +/- 2 ft-lb) |
| Starter cover bolt | 9.0 +/- 2.0 N. m (80 +/- 17 in-lb) |
| Starter cover bracket bolt | 49 +/- 9 N. m (36 +/- 7 ft-lb) |
| Starter terminal nut | 12 +/- 2 N. m (102 +/- 22 in-lb) |
| Ignition system | |
| Camshaft position sensor bolt | 11 +/- 1 N. m (98 +/- 8 in-lb) |
| Crankshaft position sensor bolt | 8.5 +/- 0.5 N. m (76 +/- 4 in-lb) |
| Ignition coil bolt | 10 +/- 2 N. m (89 +/- 17 in-lb) |
| Intake manifold stay bolt | 31 +/- 3 N. m (23 +/- 2 ft-lb) |
| Knock sensor | 23 +/- 2 N. m (17 +/- 1 ft-lb) |
| Knock sensor bracket bolt | 11 +/- 1 N. m (98 +/- 8 in-lb) |
| Spark plug | 25 +/- 5 N. m (19 +/- 3 ft-lb) |