LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Outlander LS, AWD, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Special Tool

Special Tool

SPECIAL TOOL DESCRIPTION

TOOL TOOL NUMBER AND NAME SUPERSESSION APPLICATION
A 
G04302038G04302039G04302040G04302041G04302042G04302043G04302044

B 
G04302038G04302039G04302040G04302041G04302042G04302043G04302044

C 
G04302038G04302039G04302040G04302041G04302042G04302043G04302044

D 
G04302038G04302039G04302040G04302041G04302042G04302043G04302044

E 
G04302038G04302039G04302040G04302041G04302042G04302043G04302044

F 
G04302038G04302039G04302040G04302041G04302042G04302043G04302044

G 
G04302038G04302039G04302040G04302041G04302042G04302043G04302044
 MB991958
  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991914
  6. MB991825
  7. MB991826

MUT-III sub assembly
  1. Vehicle Communication Interface (V.C.I.):
  2. MUT-III USB Cable
  3. MUT-III Main Harness A (Vehicles with CAN communication system)
  4. MUT-III Main Harness B (Vehicles without CAN communication system)
  5. MUT-III Main Harness C (for Daimler Chrysler models only)
  6. MUT-III Adapter Harness
  7. MUT-III Trigger Harness
 MB991824-KIT
NOTE: G: MB991826 MUT-III trigger harness is not necessary when pushing V.C.I. ENTER key.
  • Ignition timing check
  • Curb idle speed check
  • Idle mixture check
  • Erasing the diagnostic trouble code
CAUTION: For vehicles with CAN communication, use MUT-III main harness A to send simulated vehicle speed. If you connect MUT-III main harness B instead, the CAN communication does not function correctly
NOTE: This vehicle supports only the CAN communication between the SRS-ECU and the MUT-III
G04302045
 MB991519
Generator harness connector		 MIT530
Micrd 530 charging system tester.		 Checking of generator ("S" terminal voltage)
scientia non olet · About LEMON Manuals