Fastener Tightening Specification
FASTENER TIGHTENING SPECIFICATION
| ITEM | SPECIFICATION |
|---|---|
| Air bleed bolt | 14 +/- 1 N.m (120 +/- 13 in-lb) |
| Cylinder block drain plug | 39 +/- 5 N.m (29 +/- 3 ft-lb) |
| Cooling fan | |
| Cooling fan bolt | 11 +/- 1 N.m (93 +/- 13 in-lb) |
| Fan clutch nut | 11 +/- 1 N.m (93 +/- 13 in-lb) |
| Radiator | |
| Radiator support bolt | 12 +/- 2 N.m (101 +/- 23 in-lb) |
| Shroud bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Thermostat | |
| Water inlet fitting bolt | 12 +/- 1 N.m (102 +/- 13 in-lb) |
| Water pump | |
| Fitting and Water pump bolt | 12 +/- 1 N.m (102 +/- 13 in-lb) |
| Intake manifold plenum and Bracket bolt | 14 +/- 1 N.m (120 +/- 13 in-lb) |
| Spark plug cable support bolt | 13 +/- 2 N.m (111 +/- 22 in-lb) |
| Thermostat case and Fitting bolt | 9.0 +/- 1.0 N.m (80 +/- 9 in-lb) |
| Water pump bolt | 24 +/- 3 N.m (18 +/- 2 ft-lb) |
| Water outlet fitting and Thermostat case bolt | 12 +/- 1 N.m (102 +/- 13 in-lb) |
| Water outlet fitting and Bracket bolt | 14 +/- 1 N.m (120 +/- 13 in-lb) |
| Water hose and water pipe | |
| Fitting bolt | 12 +/- 1 N.m (102 +/- 13 in-lb) |
| Water pipe assembly bolt | 14 +/- 1 N.m (120 +/- 13 in-lb) |
| Water outlet pipe assembly bolt | 14 +/- 1 N.m (120 +/- 13 in-lb) |
| Water passage assembly bolt | 19 +/- 1 N.m (14 +/- 1 ft-lb) |
| Water outlet fitting and Thermostat case and Fitting bolt | 9.0 +/- 1.0 N.m (80 +/- 9 in-lb) |