LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Montero >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Basic Brake System >> Specifications >> Service Specifications

Service Specifications

SERVICE SPECIFICATIONS

ITEM STANDARD VALUE LIMIT
Brake pedal height mm (in) 192 - 195 (7.6 - 7.7) -
Brake pedal play mm (in) 3 (0.1) or less -
Brake pedal to floor board clearance when the brake pedal is depressed mm (in)
< Pedal depression force: Approximately 500 N (112 lb) >
90 (3.5) or more -
Hydraulic brake booster (HBB) Pump motor operating time: seconds When brake fluid pressure is not applied to power supply system 20 - 80 -
With power assist 2 - 11 -
Hydraulic pressure generated at test without booster: kPa (psi) Depressing force 100 N (22 lb) Front 600 (87) or more -
Rear 0 (0) -
Depressing force 500 N (112 lb) Front 4,500 (653) or more -
Rear 0 (0) -
Hydraulic pressure generated at test with booster: kPa (psi) Depressing force 100 N (22 lb) Front 3,000 - 4,000
(435 - 580)
-
Rear 3,300 - 4,300
(479 - 624)
-
Depressing force 200 N (45 lb) Front 8,000 - 10,000
(1,160 - 1,450)
-
Rear 8,000 - 10,000
(1,160 - 1,450)
-
  Hydraulic pressure generated at test with booster: kPa (psi) Depressing force 400 N (90 lb) Front 14,000 - 18,000
(2,030 - 2,611)
-
Rear 14,000 - 18,000
(2,030 - 2,611)
-
Depressing force 500 N (112 lb) Front 15,000 - 19,000
(2,175 - 2,756)
-
Rear 15,000 - 19,000
(2,175 - 2,756)
-
Front disc brake Pad thickness mm (in) 10.0 (0.39) Minimum 2.0 (0.08)
Disc thickness mm (in) 26.0 (1.02) Minimum 24.4 (0.96)
Disc run-out mm (in) - 0.06 (0.002)
Drag force N (lb) 55 (12) -
Rear disc brake Pad thickness mm (in) 10.0 (0.39) Minimum 2.0 (0.08)
Disc thickness mm (in) 22.0 (0.87) Minimum 20.4 (0.80)
Disc run-out mm (in) - 0.06 (0.002)
Drag force N (lb) 55 (12) -
Front hub end play mm (in) - 0 (0)
Rear hub end play mm (in) - 0 (0)