LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Lancer Evolution >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> Rear Axle - Lancer Evolution >> Driveshaft Assembly >> Disassembly And Assembly >> Disassembly Service Points >> << B >> TJ Boot/EBJ Boot Removal

<< B >> TJ Boot/EBJ Boot Removal

  1. Wipe off grease from the shaft spline part.
  2. Wrap plastic tape around the spline part on the TJ side of the driveshaft so that TJ and EBJ boots are not damaged when they are removed.
    Fig 1: Wrapping Plastic Tape Around Spline Part On TJ Side Of Driveshaft
    G04297100Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals