LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Lancer Evolution RS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Basic Brake System - Lancer) >> Brake Pedal >> Inspection >> Stoplight Switch Check

Stoplight Switch Check

WARNING: This page is about a different variant/trim than selected.
  1. Connect an ohmmeter between the stoplight switch connector terminals.
  2. There should be no continuity between the terminals when the plunger is pushed in as shown. There should be continuity when it is released.
Fig 1: Connecting An Ohmmeter Between Stoplight Switch Connector Terminals
G04277622Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals