Fastener Tightening Specifications
WARNING: This page is about a different car, the 2005 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Hood | |
| Hood hinge bolt (hood side) | 11 +/- 2 N.m (98 +/- 17 in-lb) |
| Hood hinge bolt (body side) | 21 +/- 4 N.m (16 +/- 2 ft-lb) |
| Hood hinge nut (body side) | 11 +/- 2 N.m (98 +/- 17 in-lb) |
| Hood latch bolt | 9.0 +/- 2.0 N.m (80 +/- 17 in-lb) |
| Fuel filler lid | |
| Fuel filler lid bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Strut tower bar | |
| Strut tower bar nut | 44 +/- 5 N.m (32 +/- 4 in-lb) |
| Door | |
| Door check bolt (body side) | 11 +/- 2 N.m (98 +/- 17 in-lb) |
| Door check bolt (door side) | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Door hinge bolt (body side) | 27 +/- 5 N.m (20 +/- 4 ft-lb) |
| Door hinge bolt (door side) | 21 +/- 4 N.m (16 +/- 2 ft-lb) |
| Door outside handle bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Door latch assembly screw | 9.0 +/- 2.0 N.m (80 +/- 17 in-lb) |
| Door switch screw | 1.5 +/- 0.5 N.m (14 +/- 4 in-lb) |
| Striker screw | 11 +/- 2 N.m (98 +/- 17 in-lb) |
| Trunk lid | |
| Trunk lid latch assembly bolt | 8.8 +/- 2.0 N.m (78 +/- 17 in-lb) |
| Striker bolt | 8.8 +/- 2.0 N.m (78 +/- 17 in-lb) |