Section 13 (Exterior - Lancer Evolution): Specifications: Adhesives
WARNING: This page is about a different variant/trim than selected.
ADHESIVES SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Front three-diamond mark | Adhesive tape: Double-sided tape 0.8 mm (0.03 in) thickness |
| Side air dam assembly | Adhesive tape: Double-sided tape 5 mm (0.20 in) width and 1.2 mm (0.05 in) thickness |
| Rear spoiler assembly | Adhesive tape: Double-sided tape 1.6 mm (0.22 in) thickness |