LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Endeavor LS, AWD >> Repair and Diagnosis >> Maintenance >> Procedures >> General >> Maintenance Service >> 12. Transfer Oil >> Transfer Oil Level Check

Transfer Oil Level Check

  1. Remove the filler plug.
  2. Check that the oil level is up to the lower edge of the filler plug hole.
  3. Check that the oil is not noticeably dirty.
  4. Tighten the filler plug to the specified torque.

    Tightening torque: 32 +/- 2 N.m (23 +/- 2 ft-lb) 

    Fig 1: Identifying Filler Plug Hole And Plug
    G04280389Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals