LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Outlander XLS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Body) >> Liftgate >> Liftgate Handle And Latch >> Inspection >> Liftgate Handle Check

Liftgate Handle Check

WARNING: This page is about a different car, the 2005 Mitsubishi Endeavor. However, it is still accessible from the selected car via links, so may be relevant.

Check continuity between the liftgate handle terminals.

TESTER CONNECTION SPECIFIED CONDITION CHART

HANDLE POSITION TESTER CONNECTION SPECIFIED CONDITION
At the "ON" position 1 - 2 Less than 2 ohms
At the "OFF" position 1 - 2 Open circuit
Fig 1: Checking Continuity Between Liftgate Handle Terminals
G02366478Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals