LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Outlander XLS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Body) >> Keyless Entry System >> On-Vehicle Service >> Enabling/Disabling The ANSWERBACK Function >> Enabling/Disabling The Horn ANSWERBACK Function

Enabling/Disabling The Horn ANSWERBACK Function

WARNING: This page is about a different car, the 2005 Mitsubishi Endeavor. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the ignition key.
  2. Push the "UNLOCK" button while holding the "LOCK" button down for four to ten seconds.
  3. If both the "LOCK" button and "UNLOCK" button are released, the ETACS-ECU tone alarm will sound, indicating that the horn answerback function can be enabled or disabled.
    • Enable the horn answerback function*: The ETACS-ECU tone alarm will sound once. 
    • Disable the horn answerback function: The ETACS-ECU tone alarm will sound twice. 
    • Enable the horn answerback function**: The ETACS-ECU tone alarm will sound three times. 
    NOTE: *: The horn will sound if "LOCK" button is pressed with the doors and liftgate locked.
    **: The horn will sound if the doors and liftgate are locked with the keyless entry system.
scientia non olet · About LEMON Manuals