LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Outlander XLS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Body) >> Keyless Entry System >> On-Vehicle Service >> Enabling/Disabling The ANSWERBACK Function >> Enabling/Disabling The Hazard ANSWERBACK Function >> How To Adjust Hazard ANSWERBACK When The Transmitter Is Used To Lock Doors

How To Adjust Hazard ANSWERBACK When The Transmitter Is Used To Lock Doors

WARNING: This page is about a different car, the 2005 Mitsubishi Endeavor. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the ignition key.
  2. Push the "LOCK" button while holding the "UNLOCK" button pushed for four to ten seconds.
  3. If the "LOCK" button and "UNLOCK" button are released in that order, the ETACS-ECU tone alarm will sound, indicating that the hazard answerback function can be enabled or disabled when the doors are locked.
    • Enable the hazard answerback function when the doors are locked: The ETACS-ECU tone alarm will sound once. 
    • Disable the hazard answerback function when the doors are locked: The ETACS-ECU tone alarm will sound twice. 
scientia non olet · About LEMON Manuals